Difference between revisions of "Vayu Cape Application Notes"
From Yantrr Wiki
| Line 1: | Line 1: | ||
This page contain Application Notes about how to setup Yantrr Beaglebone Vayu Cape with Beaglebone Black. | This page contain Application Notes about how to setup Yantrr Beaglebone Vayu Cape with Beaglebone Black. | ||
| − | == | + | == Vayu 2G & 2G + GPS capes == |
| − | + | ||
Data connection is established based on PPP protocols. Wvdial is mainly used to configure the dialup settings. | Data connection is established based on PPP protocols. Wvdial is mainly used to configure the dialup settings. | ||
| − | For setting up various settings for PPP connection and establishing a data connection | + | For setting up various settings for PPP connection and establishing a data connection. |
| − | * Way to setup the Vayu | + | * Way to setup the Vayu 2g Capes |
| − | * How to write wvdial conf files | + | * How to read location and coarse time as NMEA-0183 message from the serial UART ttyO4 port |
| + | * How to write wvdial conf files for any network | ||
* Sample wvconf file for AT&T and T-Mobile USA | * Sample wvconf file for AT&T and T-Mobile USA | ||
| + | * For the precise timing and setting up | ||
| + | |||
| + | == Vayu 3G & 3G + GPS capes == | ||
| + | |||
| + | * Way to setup the Vayu 2g Capes | ||
| + | * How to read location and coarse time as NMEA-0183 message from the serial UART ttyO4 port | ||
| + | * How to write wvdial conf files for any network | ||
| + | * Sample wvconf file for AT&T and T-Mobile USA | ||
== Configuring for GPS Location and Time Synchronization == | == Configuring for GPS Location and Time Synchronization == | ||
GPS on the 2G & 3G capes are used for mainly: | GPS on the 2G & 3G capes are used for mainly: | ||
| − | * | + | * |
* Fine 1PPS Time synchronization by running a NTP server for Debian Wheezy, follow this [[Configuring for GPS Location and Time Synchronization]] | * Fine 1PPS Time synchronization by running a NTP server for Debian Wheezy, follow this [[Configuring for GPS Location and Time Synchronization]] | ||
Revision as of 02:23, 24 February 2014
This page contain Application Notes about how to setup Yantrr Beaglebone Vayu Cape with Beaglebone Black.
Vayu 2G & 2G + GPS capes
Data connection is established based on PPP protocols. Wvdial is mainly used to configure the dialup settings. For setting up various settings for PPP connection and establishing a data connection.
- Way to setup the Vayu 2g Capes
- How to read location and coarse time as NMEA-0183 message from the serial UART ttyO4 port
- How to write wvdial conf files for any network
- Sample wvconf file for AT&T and T-Mobile USA
- For the precise timing and setting up
Vayu 3G & 3G + GPS capes
- Way to setup the Vayu 2g Capes
- How to read location and coarse time as NMEA-0183 message from the serial UART ttyO4 port
- How to write wvdial conf files for any network
- Sample wvconf file for AT&T and T-Mobile USA
Configuring for GPS Location and Time Synchronization
GPS on the 2G & 3G capes are used for mainly:
- Fine 1PPS Time synchronization by running a NTP server for Debian Wheezy, follow this Configuring for GPS Location and Time Synchronization
