Main Page

From Yantrr Wiki
Jump to: navigation, search

This is the main page for all the documentation in support of our products. We will try to keep the wiki articles updated to the best of our knowledge. If you find anything missing, please let us know at Yantrr Support

ARCA-V2 Wireless Gateway

Overview

Software Startup Guide for ARCA-V2

Precompiled Images

Building ARCA-V2 Boot Image

VIBEQ IoT Platform

Overview

Getting Started

Precompiled Images

VAYU2 M2M Capes

Overview

Getting Started

Precompiled Images

INDU-RS

Overview

Getting Started

Precompiled Images

VAYU M2M Capes

Overview

Getting Started

Precompiled Images

VIBE IoT Platform

Software Starter Guide

Covers full introduction to VIBE hardware and steps to use the Modem and GPS.

Application Notes

Operating Systems supported (Debian, Ubuntu, Angstrom, Android)

We have tested the VAYU capes in the following configurations on different operating systems:

  • Debian: We provide full support for this. Pre-compiled images for both SD Card based use and for flashing to the eMMC are provided (see Section above).
  • Ubuntu: We have tested our capes on Ubuntu. GPS (NMEA over serial tty port) is known to be working, PPS requires PPS support to be compiled in the kernel. The 3G modem (of the 3GH* and 3GC* capes) as well as the 2G modem (of the 2GD* and 2GQ* capes) have been tested to work on Ubuntu. We are in the process of generating Ubuntu images and making all configuration files available online.
  • Angstrom: See Click Here.
  • Android: We've been able to partially test our cape. Again, there are no known issues but we will put images and configuration files after fully verifying them.

Short Application Notes

Configuring ppp for automatic connection