Difference between revisions of "Vayu Cape Application Notes"
From Yantrr Wiki
(→Vayu 3G & 3G + GPS capes) |
(→Configuring for GPS Location and Time Synchronization) |
||
| Line 22: | Line 22: | ||
'''<big>[[SW_startup_guide_for_Vayu_3G|SW_startup_guide_for_Vayu_3G]]</big>''' | '''<big>[[SW_startup_guide_for_Vayu_3G|SW_startup_guide_for_Vayu_3G]]</big>''' | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
Revision as of 15:16, 24 February 2014
This page contain Application Notes about how to setup Yantrr Beaglebone Vayu Cape with Beaglebone Black.
Vayu 2G & 2G + GPS capes
Data connection is established based on PPP protocols. Wvdial is mainly used to configure the dialup settings. For setting up various settings for PPP connection and establishing a data connection on these capes follow the link to the wiki
- Way to setup the Vayu 2G Capes
- How to read location and coarse time as NMEA-0183 message from the serial UART ttyO4 port
- How to write wvdial conf files for any network
- Sample wvdial.conf file for AT&T and T-Mobile USA
- For the precise timing and setting up
Vayu 3G & 3G + GPS capes
Data connection is established based on PPP protocols. Wvdial is mainly used to configure the dialup settings. For setting up various settings for PPP connection and establishing a data connection on these capes follow the link to the wiki
- Way to setup the Vayu 3g Capes
- How to read location and coarse time as NMEA-0183 message from the serial UART ttyO4 port
- How to write wvdial conf files for any network
- Sample wvdial.conf file for AT&T and T-Mobile USA
- For the precise timing and setting up
