Difference between revisions of "VAYU Cape Compatibility"
From Yantrr Wiki
(→Chart) |
(→Chart) |
||
Line 57: | Line 57: | ||
|bgcolor="lawngreen" | Compatible | |bgcolor="lawngreen" | Compatible | ||
|} | |} | ||
+ | |||
+ | <pre> | ||
+ | Notes 1. UART1_TXD and UART1_RXD used in full duplex and half duplex mode for 2G module | ||
+ | 2. GPIO1_16 is used as UART1_DTRN when used in Full Duplex mode | ||
+ | 3. EHRPWM1B is used for GPS Module Reset | ||
+ | 4. UART$_TXD and UART4_RXD is used for GPS Module | ||
+ | 5. GPIO1_28 is used for resetting 2G or 3G modules | ||
+ | </pre> |
Revision as of 09:47, 26 February 2014
Yantrr provides this information on the basis of best effort analysis of published specifications of other capes and does not guarantee the compatibility.
Chart
Board | 2G (Dual/Quad) | 2G+GPS | 3G(GSM/CDMA) | 3G+GPS | GPS Only |
---|---|---|---|---|---|
TT3201 | UART1_RXD and UART1_TXD conflicts |
UART1_RXD and UART1_TXD conflicts |
Compatible | Compatible | Compatible |
CAN Bus | UART1_RXD and UART1_TXD conflicts |
UART1_RXD and UART1_TXD conflicts |
Compatible | Compatible | Compatible |
RS232 | Compatible | Compatible | Compatible | Compatible | Compatible |
RS485 | GPIO1_16 conflicts | GPIO1_16 and EHRPWM1B conflicts |
Compatible | EHRPWM1B conflicts | EHRPWM1B conflicts |
Weather Cape | Compatible | Compatible | Compatible | Compatible | Compatible |
Profibus | Uart1(rxd,txd) conflicts |
Uart1(rxd, txd) and Uart4(rxd,txd)conflicts |
Compatible | Uart4(rxd,txd) conflicts |
Uart4(rxd,txd) conflicts |
Inertial Navigation System | UART1_TXD, UART1_RXD and < br\> GPIO1_28 conflicts | UART1_TXD, UART1_RXD and < br\> GPIO1_28 conflicts | GPIO1_28 conflicts | GPIO1_28 conflicts | Compatible |
Notes 1. UART1_TXD and UART1_RXD used in full duplex and half duplex mode for 2G module 2. GPIO1_16 is used as UART1_DTRN when used in Full Duplex mode 3. EHRPWM1B is used for GPS Module Reset 4. UART$_TXD and UART4_RXD is used for GPS Module 5. GPIO1_28 is used for resetting 2G or 3G modules