|
|
| Line 1: |
Line 1: |
| − | == VAYU Capes Compatibility With Other BeagleBone Black Capes ==
| + | Page to be deleted. An alternate page exists. |
| − | | + | |
| − | (Yantrr provides this information on the basis of best effort analysis of published specifications of other capes and does not guarantee the compatibility)
| + | |
| − |
| + | |
| − | (Yantrr VAYU capes can be used in stacked configuration but should be the topmost cape installed in the stack due to access needed to antenna connectors)
| + | |
| − | | + | |
| − | {| class="wikitable"
| + | |
| − | |-
| + | |
| − | ! Cape !! VAYU-2G-A,VAYU-2GQ-A !! VAYU-2GP-A,VAYU-2GQP-A !! VAYU-3GH-A !! VAYU-3GHP-A !! VAYU-P
| + | |
| − | |-
| + | |
| − | | TT3201 || UART1_RXD and UART1_TXD conflicts<sup>1</sup> || UART1_RXD and UART1_TXD conflicts<sup>1</sup> || Fully Compatible || Fully Compatible || Fully Compatible
| + | |
| − | |-
| + | |
| − | | Example || Example || Example || Example || Example || Example
| + | |
| − | |-
| + | |
| − | | Example || Example || Example || Example || Example || Example
| + | |
| − | |-
| + | |
| − | | Example || Example || Example || Example || Example || Example
| + | |
| − | |-
| + | |
| − | | Example || Example || Example || Example || Example || Example
| + | |
| − | |-
| + | |
| − | | Example || Example || Example || Example || Example || Example
| + | |
| − | |}
| + | |
| − | | + | |
| − | Notes:
| + | |
| − | # UART1_TXD and UART1_RXD used in full duplex and half duplex mode for 2G module
| + | |
| − | # GPIO1_16 is used as UART1_DTRN when used in full duplex mode
| + | |
| − | # EHRPWM1B is used for GPS module reset
| + | |
| − | # UART4_TXD and UART4_RXD is used for GPS module
| + | |
| − | # GPIO1_28 is used for resetting 2G or 3G modules
| + | |
Latest revision as of 21:08, 15 April 2014
Page to be deleted. An alternate page exists.
