Difference between revisions of "VAYU Cape Compatibility"

From Yantrr Wiki
Jump to: navigation, search
(→‎Chart)
(→‎Chart)
 
(2 intermediate revisions by one other user not shown)
Line 7: Line 7:
 
|-  
 
|-  
 
|bgcolor="white" | TT3201
 
|bgcolor="white" | TT3201
−
|bgcolor="yellow" | UART1_RXD and <br \> UART1_TXD conflicts
+
|bgcolor="yellow" | UART1_RXD and <br \> UART1_TXD conflicts<sup>1</sup>
−
|bgcolor="yellow" | UART1_RXD and <br \> UART1_TXD conflicts
+
|bgcolor="yellow" | UART1_RXD and <br \> UART1_TXD conflicts<sup>1</sup>
 
|bgcolor="lawngreen" | Compatible  
 
|bgcolor="lawngreen" | Compatible  
 
|bgcolor="lawngreen" | Compatible  
 
|bgcolor="lawngreen" | Compatible  
Line 15: Line 15:
 
|-  
 
|-  
 
|bgcolor="white" | CAN Bus
 
|bgcolor="white" | CAN Bus
−
|bgcolor="yellow" | UART1_RXD and <br \> UART1_TXD conflicts
+
|bgcolor="yellow" | UART1_RXD and <br \> UART1_TXD conflicts<sup>1</sup>
−
|bgcolor="yellow" | UART1_RXD and <br \> UART1_TXD conflicts
+
|bgcolor="yellow" | UART1_RXD and <br \> UART1_TXD conflicts<sup>1</sup>
 
|bgcolor="lawngreen" | Compatible  
 
|bgcolor="lawngreen" | Compatible  
 
|bgcolor="lawngreen" | Compatible  
 
|bgcolor="lawngreen" | Compatible  
Line 29: Line 29:
 
|-  
 
|-  
 
|bgcolor="white" | RS485
 
|bgcolor="white" | RS485
−
|bgcolor="yellow" | GPIO1_16 conflicts
+
|bgcolor="yellow" | GPIO1_16 conflicts<sup>2</sup>
−
|bgcolor="yellow" | GPIO1_16 and <br \> EHRPWM1B conflicts
+
|bgcolor="yellow" | GPIO1_16<sup>2</sup> and <br \> EHRPWM1B conflicts<sup>3</sup>
 
|bgcolor="lawngreen" | Compatible  
 
|bgcolor="lawngreen" | Compatible  
−
|bgcolor="yellow" | EHRPWM1B conflicts  
+
|bgcolor="yellow" | EHRPWM1B conflicts<sup>3</sup>
−
|bgcolor="yellow" | EHRPWM1B conflicts  
+
|bgcolor="yellow" | EHRPWM1B conflicts<sup>3</sup>
  
 
|-  
 
|-  
Line 44: Line 44:
 
|-  
 
|-  
 
|bgcolor="white" | Profibus
 
|bgcolor="white" | Profibus
−
|bgcolor="yellow" | Uart1(rxd,txd) <br \> conflicts
+
|bgcolor="yellow" | UART1(RXD,TXD) <br \> conflicts<sup>1</sup>
−
|bgcolor="yellow" | Uart1(rxd, txd) and <br \>Uart4(rxd,txd)conflicts
+
|bgcolor="yellow" | UART1(RXD,TXD)<sup>1</sup> and <br \>UART4(RXD,TXD) conflicts<sup>4</sup>
 
|bgcolor="lawngreen" | Compatible  
 
|bgcolor="lawngreen" | Compatible  
−
|bgcolor="yellow" | Uart4(rxd,txd) <br \> conflicts
+
|bgcolor="yellow" | UART4(RXD,TXD) <br \> conflicts<sup>4</sup>
−
|bgcolor="yellow" | Uart4(rxd,txd) <br \> conflicts
+
|bgcolor="yellow" | UART4(RXD,TXD) <br \> conflicts<sup>4</sup>
 
|-  
 
|-  
 
|bgcolor="white" | Inertial Navigation System
 
|bgcolor="white" | Inertial Navigation System
−
|bgcolor="yellow" | UART1_TXD, UART1_RXD and < br\> GPIO1_28 conflicts
+
|bgcolor="yellow" | UART1_TXD, UART1_RXD<sup>1</sup> and <br \> GPIO1_28<sup>5</sup> conflicts
−
|bgcolor="yellow" | UART1_TXD, UART1_RXD and < br\> GPIO1_28 conflicts
+
|bgcolor="yellow" | UART1_TXD, UART1_RXD<sup>1</sup> and <br \> GPIO1_28<sup>5</sup> conflicts
−
|bgcolor="yellow" | GPIO1_28 conflicts
+
|bgcolor="yellow" | GPIO1_28<sup>5</sup> conflicts
−
|bgcolor="yellow" | GPIO1_28 conflicts
+
|bgcolor="yellow" | GPIO1_28<sup>5</sup> conflicts
 
|bgcolor="lawngreen" | Compatible
 
|bgcolor="lawngreen" | Compatible
 
|}
 
|}
  
 
<pre>  
 
<pre>  
−
Notes 1. UART1_TXD and UART1_RXD used in full duplex and half duplex mode for 2G module
+
Notes
 +
1. UART1_TXD and UART1_RXD used in full duplex and half duplex mode for 2G module
 
2. GPIO1_16 is used as UART1_DTRN when used in Full Duplex mode
 
2. GPIO1_16 is used as UART1_DTRN when used in Full Duplex mode
 
3. EHRPWM1B is used for GPS Module Reset
 
3. EHRPWM1B is used for GPS Module Reset
−
4. UART$_TXD and UART4_RXD is used for GPS Module
+
4. UART4_TXD and UART4_RXD is used for GPS Module
 
5. GPIO1_28 is used for resetting 2G or 3G modules
 
5. GPIO1_28 is used for resetting 2G or 3G modules
 
</pre>
 
</pre>
  
−
We are considering a redesign of our 2G/2G+GPS cape series to make it compatible with other sensor capes. But, all depends on the volumes. If you need some other cape working with VAYU series capes, write to us at [mailto:sales@yantrr.com].
+
If you have specific queries, please direct it towards [mailto:sales@yantrr.com | sales@yantrr.com].

Latest revision as of 21:30, 15 April 2014

Yantrr provides this information on the basis of best effort analysis of published specifications of other capes and does not guarantee the compatibility.

Chart

Board 2G (Dual/Quad) 2G+GPS 3G(GSM/CDMA) 3G+GPS GPS Only
TT3201 UART1_RXD and
UART1_TXD conflicts1 		UART1_RXD and
UART1_TXD conflicts1 		Compatible Compatible Compatible
CAN Bus UART1_RXD and
UART1_TXD conflicts1 		UART1_RXD and
UART1_TXD conflicts1 		Compatible Compatible Compatible
RS232 Compatible Compatible Compatible Compatible Compatible
RS485 GPIO1_16 conflicts2 GPIO1_162 and
EHRPWM1B conflicts3 		Compatible EHRPWM1B conflicts3 EHRPWM1B conflicts3
Weather Cape Compatible Compatible Compatible Compatible Compatible
Profibus UART1(RXD,TXD)
conflicts1 		UART1(RXD,TXD)1 and
UART4(RXD,TXD) conflicts4 		Compatible UART4(RXD,TXD)
conflicts4 		UART4(RXD,TXD)
conflicts4
Inertial Navigation System UART1_TXD, UART1_RXD1 and
GPIO1_285 conflicts 		UART1_TXD, UART1_RXD1 and
GPIO1_285 conflicts 		GPIO1_285 conflicts GPIO1_285 conflicts Compatible 
 
Notes
1. UART1_TXD and UART1_RXD used in full duplex and half duplex mode for 2G module
2. GPIO1_16 is used as UART1_DTRN when used in Full Duplex mode
3. EHRPWM1B is used for GPS Module Reset
4. UART4_TXD and UART4_RXD is used for GPS Module
5. GPIO1_28 is used for resetting 2G or 3G modules

If you have specific queries, please direct it towards | sales@yantrr.com.

Retrieved from "http://wiki.yantrr.com/index.php?title=VAYU_Cape_Compatibility&oldid=383"