Difference between revisions of "Vayu Cape Application Notes"
From Yantrr Wiki
(→Vayu 2G & 2G + GPS capes) |
m (→Vayu 3G & 3G + GPS capes) |
||
| (3 intermediate revisions by the same user not shown) | |||
| Line 7: | Line 7: | ||
* How to read location and coarse time as NMEA-0183 message from the serial UART ttyO4 port | * How to read location and coarse time as NMEA-0183 message from the serial UART ttyO4 port | ||
* How to write wvdial conf files for any network | * How to write wvdial conf files for any network | ||
| − | * Sample wvdial.conf file for [[ | + | * Sample wvdial.conf file for [[Sample_wvdial.conf_file#Sample_Wvdial_conf_file_for_AT.26T_3G | AT&T]] and [[Sample_wvdial.conf_file#Sample_Wvdial_conf_file_for_T-Mobile_2G | T-Mobile USA]] |
* For the precise timing and setting up | * For the precise timing and setting up | ||
| Line 18: | Line 18: | ||
* How to read location and coarse time as NMEA-0183 message from the serial UART ttyO4 port | * How to read location and coarse time as NMEA-0183 message from the serial UART ttyO4 port | ||
* How to write wvdial conf files for any network | * How to write wvdial conf files for any network | ||
| − | * Sample | + | * Sample wvdial.conf file for [[Sample_wvdial.conf_file#Sample_Wvdial_conf_file_for_AT.26T_3G | AT&T]] and [[Sample_wvdial.conf_file#Sample_Wvdial_conf_file_for_T-Mobile_2G | T-Mobile USA]] |
* For the precise timing and setting up | * For the precise timing and setting up | ||
Latest revision as of 16:17, 24 February 2014
This page contain Application Notes about how to setup Yantrr Beaglebone Vayu Cape with Beaglebone Black.
Vayu 2G & 2G + GPS capes
Data connection is established based on PPP protocols. Wvdial is mainly used to configure the dialup settings. For setting up various settings for PPP connection and establishing a data connection on these capes follow the link to the wiki
- Way to setup the Vayu 2G Capes
- How to read location and coarse time as NMEA-0183 message from the serial UART ttyO4 port
- How to write wvdial conf files for any network
- Sample wvdial.conf file for AT&T and T-Mobile USA
- For the precise timing and setting up
Vayu 3G & 3G + GPS capes
Data connection is established based on PPP protocols. Wvdial is mainly used to configure the dialup settings. For setting up various settings for PPP connection and establishing a data connection on these capes follow the link to the wiki
- Way to setup the Vayu 3g Capes
- How to read location and coarse time as NMEA-0183 message from the serial UART ttyO4 port
- How to write wvdial conf files for any network
- Sample wvdial.conf file for AT&T and T-Mobile USA
- For the precise timing and setting up
Configuring for GPS Location and Time Synchronization
GPS on the 2G & 3G capes are used for mainly:
- Geo location
- Precise Time synchronization using 1pps by running a NTP server for Debian Wheezy, follow this Configuring for GPS Location and Time Synchronization
