Difference between revisions of "Vayu Cape Application Notes"
From Yantrr Wiki
(Created page with "This page contain Application Notes about how to setup Yantrr Beaglebone Vayu Cape with Beaglebone Black. == Configuring for Data Connection == For setting up various settin...") |
m (→Vayu 3G & 3G + GPS capes) |
||
| (21 intermediate revisions by 2 users not shown) | |||
| Line 1: | Line 1: | ||
This page contain Application Notes about how to setup Yantrr Beaglebone Vayu Cape with Beaglebone Black. | This page contain Application Notes about how to setup Yantrr Beaglebone Vayu Cape with Beaglebone Black. | ||
| − | == | + | == Vayu 2G & 2G + GPS capes == |
| + | Data connection is established based on PPP protocols. Wvdial is mainly used to configure the dialup settings. | ||
| + | For setting up various settings for PPP connection and establishing a data connection on these capes follow the link to the wiki | ||
| + | * Way to setup the Vayu 2G Capes | ||
| + | * How to read location and coarse time as NMEA-0183 message from the serial UART ttyO4 port | ||
| + | * How to write wvdial conf files for any network | ||
| + | * Sample wvdial.conf file for [[Sample_wvdial.conf_file#Sample_Wvdial_conf_file_for_AT.26T_3G | AT&T]] and [[Sample_wvdial.conf_file#Sample_Wvdial_conf_file_for_T-Mobile_2G | T-Mobile USA]] | ||
| + | * For the precise timing and setting up | ||
| − | For setting up various settings for PPP connection and establishing a data connection | + | '''<big>[[SW_startup_guide_for_Vayu_2G]]</big>''' |
| + | |||
| + | == Vayu 3G & 3G + GPS capes == | ||
| + | Data connection is established based on PPP protocols. Wvdial is mainly used to configure the dialup settings. | ||
| + | For setting up various settings for PPP connection and establishing a data connection on these capes follow the link to the wiki | ||
| + | * Way to setup the Vayu 3g Capes | ||
| + | * How to read location and coarse time as NMEA-0183 message from the serial UART ttyO4 port | ||
| + | * How to write wvdial conf files for any network | ||
| + | * Sample wvdial.conf file for [[Sample_wvdial.conf_file#Sample_Wvdial_conf_file_for_AT.26T_3G | AT&T]] and [[Sample_wvdial.conf_file#Sample_Wvdial_conf_file_for_T-Mobile_2G | T-Mobile USA]] | ||
| + | * For the precise timing and setting up | ||
| + | |||
| + | '''<big>[[SW_startup_guide_for_Vayu_3G|SW_startup_guide_for_Vayu_3G]]</big>''' | ||
== Configuring for GPS Location and Time Synchronization == | == Configuring for GPS Location and Time Synchronization == | ||
| − | + | GPS on the 2G & 3G capes are used for mainly: | |
| + | * Geo location | ||
| + | * Precise Time synchronization using 1pps by running a NTP server for Debian Wheezy, follow this '''<big>[[Configuring for GPS Location and Time Synchronization]]</big>''' | ||
Latest revision as of 15:17, 24 February 2014
This page contain Application Notes about how to setup Yantrr Beaglebone Vayu Cape with Beaglebone Black.
Vayu 2G & 2G + GPS capes
Data connection is established based on PPP protocols. Wvdial is mainly used to configure the dialup settings. For setting up various settings for PPP connection and establishing a data connection on these capes follow the link to the wiki
- Way to setup the Vayu 2G Capes
- How to read location and coarse time as NMEA-0183 message from the serial UART ttyO4 port
- How to write wvdial conf files for any network
- Sample wvdial.conf file for AT&T and T-Mobile USA
- For the precise timing and setting up
Vayu 3G & 3G + GPS capes
Data connection is established based on PPP protocols. Wvdial is mainly used to configure the dialup settings. For setting up various settings for PPP connection and establishing a data connection on these capes follow the link to the wiki
- Way to setup the Vayu 3g Capes
- How to read location and coarse time as NMEA-0183 message from the serial UART ttyO4 port
- How to write wvdial conf files for any network
- Sample wvdial.conf file for AT&T and T-Mobile USA
- For the precise timing and setting up
Configuring for GPS Location and Time Synchronization
GPS on the 2G & 3G capes are used for mainly:
- Geo location
- Precise Time synchronization using 1pps by running a NTP server for Debian Wheezy, follow this Configuring for GPS Location and Time Synchronization
