Difference between revisions of "FAQ 3G PPP"

From Yantrr Wiki
Jump to: navigation, search
(Created page with "'''Ques) How do I check that whether the PPP connection has been established or not?''' '''Ans)''' 1) Use the command “ifconfig ppp0” to check the network information. If...")
 
 
(One intermediate revision by the same user not shown)
Line 3: Line 3:
 
'''Ans)''' 1) Use the command “ifconfig ppp0” to check the network information. If a connection is established, an IP should be visible.
 
'''Ans)''' 1) Use the command “ifconfig ppp0” to check the network information. If a connection is established, an IP should be visible.
  
2) Details about the connection can be found in “/var/log/messages”. Issue following command : “tail –f /var/log/messages”.
+
2) Details about the connection can be found in “/var/log/messages”. Issue following command :  
 +
<pre>
 +
“tail –f /var/log/messages”.
 +
</pre>
  
 
   
 
   

Latest revision as of 02:44, 21 May 2015

Ques) How do I check that whether the PPP connection has been established or not?

Ans) 1) Use the command “ifconfig ppp0” to check the network information. If a connection is established, an IP should be visible.

2) Details about the connection can be found in “/var/log/messages”. Issue following command :

“tail –f /var/log/messages”.


Ques ) How do I configure the ppp connection for my sim card operator?

Ans) You would mainly require the Username, Password and APN of the service provider to establish a PPP connection. Ensure “wvdial” package is installed.

 “dpkg –l | grep wvdial”

If wvdial is present, issue “wvdialconf” command. Then update the service provider information in the /etc/wvdial.conf file and you are good to go.