Difference between revisions of "Vayu Cape Application Notes"

Revision as of 10:38, 24 February 2014

This page contain Application Notes about how to setup Yantrr Beaglebone Vayu Cape with Beaglebone Black.

Vayu 2G & 2G + GPS capes

Data connection is established based on PPP protocols. Wvdial is mainly used to configure the dialup settings. For setting up various settings for PPP connection and establishing a data connection on these capes follow the link to the wiki

• Way to setup the Vayu 2g Capes
• How to read location and coarse time as NMEA-0183 message from the serial UART ttyO4 port
• How to write wvdial conf files for any network
• Sample wvconf file for AT&T and T-Mobile USA
• For the precise timing and setting up

SW_startup_guide_for_Vayu_2G

Vayu 3G & 3G + GPS capes

Data connection is established based on PPP protocols. Wvdial is mainly used to configure the dialup settings. For setting up various settings for PPP connection and establishing a data connection on these capes follow the link to the wiki

• Way to setup the Vayu 3g Capes
• How to read location and coarse time as NMEA-0183 message from the serial UART ttyO4 port
• How to write wvdial conf files for any network
• Sample wvconf file for AT&T and T-Mobile USA
• For the precise timing and setting up

SW_startup_guide_for_Vayu_3G

Configuring for GPS Location and Time Synchronization

GPS on the 2G & 3G capes are used for mainly:

• Geo location
• Precise Time synchronization using 1pps by running a NTP server for Debian Wheezy, follow this Configuring for GPS Location and Time Synchronization