Difference between revisions of "Sample wvdial.conf file"
From Yantrr Wiki
(Created page with "== Sample Wvdial conf file for AT&T 3G == [Dialer Defaults] Init1 = ATZ Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 Init3 = AT+CGDCONT=1,"IP","wap.cingular",,0,0 Modem Type = US...") |
(→Sample Wvdial conf file for AT&T 3G) |
||
| Line 1: | Line 1: | ||
== Sample Wvdial conf file for AT&T 3G == | == Sample Wvdial conf file for AT&T 3G == | ||
| − | [Dialer | + | [Dialer AT_n_T_3G] |
Init1 = ATZ | Init1 = ATZ | ||
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 | Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 | ||
Revision as of 11:25, 24 February 2014
Sample Wvdial conf file for AT&T 3G
[Dialer AT_n_T_3G] Init1 = ATZ Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 Init3 = AT+CGDCONT=1,"IP","wap.cingular",,0,0 Modem Type = USB Modem Phone = *99***1# Username = wap@cingulargprs.com Password = CINGULAR1 Modem = /dev/ttyUSB0 Stupid Mode = 1 ISDN = 0 Dial Command = ATDT
Sample Wvdial conf file for T-Mobile 2G
[Dialer TMO] Modem Type = Analog Modem Phone = *99# ISDN = 0 Baud = 115200 Username = user Password = pass Modem = /dev/ttyO1 Init1 = ATZ Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 Init3 = at+cgdcont=1,"IP","epc.tmobile.com" Stupid Mode = 1 New PPPD = yes
