Difference between revisions of "VAYU Cape Compatibility"
From Yantrr Wiki
(→Chart) |
|||
| Line 66: | Line 66: | ||
</pre> | </pre> | ||
| − | + | If you have specific queries, please direct it towards [mailto:sales@yantrr.com | sales@yantrr.com]. | |
Revision as of 16:05, 26 February 2014
Yantrr provides this information on the basis of best effort analysis of published specifications of other capes and does not guarantee the compatibility.
Chart
| Board | 2G (Dual/Quad) | 2G+GPS | 3G(GSM/CDMA) | 3G+GPS | GPS Only |
|---|---|---|---|---|---|
| TT3201 | UART1_RXD and UART1_TXD conflicts |
UART1_RXD and UART1_TXD conflicts |
Compatible | Compatible | Compatible |
| CAN Bus | UART1_RXD and UART1_TXD conflicts |
UART1_RXD and UART1_TXD conflicts |
Compatible | Compatible | Compatible |
| RS232 | Compatible | Compatible | Compatible | Compatible | Compatible |
| RS485 | GPIO1_16 conflicts | GPIO1_16 and EHRPWM1B conflicts |
Compatible | EHRPWM1B conflicts | EHRPWM1B conflicts |
| Weather Cape | Compatible | Compatible | Compatible | Compatible | Compatible |
| Profibus | Uart1(rxd,txd) conflicts |
Uart1(rxd, txd) and Uart4(rxd,txd)conflicts |
Compatible | Uart4(rxd,txd) conflicts |
Uart4(rxd,txd) conflicts |
| Inertial Navigation System | UART1_TXD, UART1_RXD and < br\> GPIO1_28 conflicts | UART1_TXD, UART1_RXD and < br\> GPIO1_28 conflicts | GPIO1_28 conflicts | GPIO1_28 conflicts | Compatible |
Notes 1. UART1_TXD and UART1_RXD used in full duplex and half duplex mode for 2G module 2. GPIO1_16 is used as UART1_DTRN when used in Full Duplex mode 3. EHRPWM1B is used for GPS Module Reset 4. UART$_TXD and UART4_RXD is used for GPS Module 5. GPIO1_28 is used for resetting 2G or 3G modules
If you have specific queries, please direct it towards | sales@yantrr.com.
