Difference between revisions of "FAQ 3G PPP"
From Yantrr Wiki
m (Mayank moved page FAQ 3G ppp to FAQ 3G PPP) |
|||
| Line 3: | Line 3: | ||
'''Ans)''' 1) Use the command “ifconfig ppp0” to check the network information. If a connection is established, an IP should be visible. | '''Ans)''' 1) Use the command “ifconfig ppp0” to check the network information. If a connection is established, an IP should be visible. | ||
| − | 2) Details about the connection can be found in “/var/log/messages”. Issue following command : “tail –f /var/log/messages”. | + | 2) Details about the connection can be found in “/var/log/messages”. Issue following command : |
| + | <pre> | ||
| + | “tail –f /var/log/messages”. | ||
| + | </pre> | ||
Latest revision as of 02:44, 21 May 2015
Ques) How do I check that whether the PPP connection has been established or not?
Ans) 1) Use the command “ifconfig ppp0” to check the network information. If a connection is established, an IP should be visible.
2) Details about the connection can be found in “/var/log/messages”. Issue following command :
“tail –f /var/log/messages”.
Ques ) How do I configure the ppp connection for my sim card operator?
Ans) You would mainly require the Username, Password and APN of the service provider to establish a PPP connection. Ensure “wvdial” package is installed.
“dpkg –l | grep wvdial”
If wvdial is present, issue “wvdialconf” command. Then update the service provider information in the /etc/wvdial.conf file and you are good to go.
