Difference between revisions of "VAYU2"
From Yantrr Wiki
(→Setting up the system) |
(→Setting up the system) |
||
| Line 4: | Line 4: | ||
=Getting Started= | =Getting Started= | ||
| − | ==Setting up the system== | + | ===Setting up the system=== |
# Place a micro-SIM in the SIM card slot and connect a respective antennas to the SMA connectors. | # Place a micro-SIM in the SIM card slot and connect a respective antennas to the SMA connectors. | ||
# Mount the VAYU2 cape on Beaglebone Black. | # Mount the VAYU2 cape on Beaglebone Black. | ||
Revision as of 02:29, 1 August 2017
Contents
Overview
Quick Start Guide
Getting Started
Setting up the system
- Place a micro-SIM in the SIM card slot and connect a respective antennas to the SMA connectors.
- Mount the VAYU2 cape on Beaglebone Black.
- Ensure the power jumper J1 with all other jumpers according to your application use are in place.
- Connect the extra USB cable provided with the cape between Host port on Beaglebone Black and miniUSB device port on Cape.
- To avoid the bug on Beaglebone black with external USB hubs, please connect a USB device (Pendrive etc.) to extra host port on the cape.
- Now power up the full setup using a 5V DC adapter(min 2.5A) to barrel jack. D2 LED on the cape will glow along with LEDs on the Beaglebone black.
- Note: Before powering up ensure correct software image is loaded in Beaglebone black or VIBE/VIBE2
|
Before proceeding further ensure D2 LED is glowing properly. Make sure that the adapter being used is of proper rating and has been connected properly. |
|
Do not try to power up using USB cable alone. Always power up system with a DC adapter. Also while disconnecting power, USB cable should be removed before the DC adapter. |
