Difference between revisions of "VAYU2"
From Yantrr Wiki
(→Getting Started) |
(→Accessing the Setup) |
||
| Line 18: | Line 18: | ||
===Accessing the Setup=== | ===Accessing the Setup=== | ||
| + | * Through USB | ||
| + | For accessing the above setup, first connect the USB cable between Beaglebone Black's USB Client port and USB Host port of Desktop/Laptop. Once it get properly connected to Desktop, a user can access the setup using predefined static IP address 192.168.7.2 | ||
| + | On Windows : (Using Putty Client) | ||
| + | |||
| + | On Linux : | ||
| + | ssh root@192.168.7.2 | ||
| + | |||
| + | Default password is root. | ||
| + | |||
| + | * Through Ethernet | ||
=Software Setup Guide= | =Software Setup Guide= | ||
=Applications= | =Applications= | ||
Revision as of 03:12, 1 August 2017
Contents
Overview
Quick Start Guide
Getting Started
Setting up the system
- Place a micro-SIM in the SIM card slot and connect a respective antennas to the SMA connectors.
- Mount the VAYU2 cape on Beaglebone Black.
- Ensure the power jumper J1 with all other jumpers according to your application use are in place.
- Connect the extra USB cable provided with the cape between Host port on Beaglebone Black and miniUSB device port on Cape.
- To avoid the bug on Beaglebone black with external USB hubs, please connect a USB device (Pendrive etc.) to extra host port on the cape.
- Now power up the full setup using a 5V DC adapter(min 2.5A) to barrel jack. D2 LED on the cape will glow along with LEDs on the Beaglebone black.
- Note: Before powering up ensure correct software image is loaded in Beaglebone black or VIBE/VIBE2
|
Before proceeding further ensure D2 LED is glowing properly. Make sure that the adapter being used is of proper rating and has been connected properly. |
|
Do not try to power up using USB cable alone. Always power up system with a DC adapter. Also while disconnecting power, USB cable should be removed before the DC adapter. |
Accessing the Setup
- Through USB
For accessing the above setup, first connect the USB cable between Beaglebone Black's USB Client port and USB Host port of Desktop/Laptop. Once it get properly connected to Desktop, a user can access the setup using predefined static IP address 192.168.7.2 On Windows : (Using Putty Client)
On Linux :
ssh root@192.168.7.2
Default password is root.
- Through Ethernet
