Difference between revisions of "Sample wvdial.conf file"
From Yantrr Wiki
(→Sample Wvdial conf file for AT&T 3G) |
|||
| Line 1: | Line 1: | ||
== Sample Wvdial conf file for AT&T 3G == | == Sample Wvdial conf file for AT&T 3G == | ||
| + | <pre> | ||
[Dialer AT_n_T_3G] | [Dialer AT_n_T_3G] | ||
Init1 = ATZ | Init1 = ATZ | ||
| Line 12: | Line 13: | ||
ISDN = 0 | ISDN = 0 | ||
Dial Command = ATDT | Dial Command = ATDT | ||
| + | </pre> | ||
| + | |||
| + | To use the above file : | ||
| + | <pre> | ||
| + | wvdial AT_n_T_3G | ||
| + | </pre> | ||
== Sample Wvdial conf file for T-Mobile 2G == | == Sample Wvdial conf file for T-Mobile 2G == | ||
| − | [Dialer | + | </pre> |
| + | [Dialer TMO_2G] | ||
Modem Type = Analog Modem | Modem Type = Analog Modem | ||
Phone = *99# | Phone = *99# | ||
| Line 27: | Line 35: | ||
Stupid Mode = 1 | Stupid Mode = 1 | ||
New PPPD = yes | New PPPD = yes | ||
| + | </pre> | ||
| + | |||
| + | To use the above file : | ||
| + | <pre> | ||
| + | wvdial TMO_2G | ||
| + | </pre> | ||
Revision as of 12:27, 24 February 2014
Sample Wvdial conf file for AT&T 3G
[Dialer AT_n_T_3G] Init1 = ATZ Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 Init3 = AT+CGDCONT=1,"IP","wap.cingular",,0,0 Modem Type = USB Modem Phone = *99***1# Username = wap@cingulargprs.com Password = CINGULAR1 Modem = /dev/ttyUSB0 Stupid Mode = 1 ISDN = 0 Dial Command = ATDT
To use the above file :
wvdial AT_n_T_3G
Sample Wvdial conf file for T-Mobile 2G
</pre> [Dialer TMO_2G] Modem Type = Analog Modem Phone = *99# ISDN = 0 Baud = 115200 Username = user Password = pass Modem = /dev/ttyO1 Init1 = ATZ Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 Init3 = at+cgdcont=1,"IP","epc.tmobile.com" Stupid Mode = 1 New PPPD = yes </pre>
To use the above file :
wvdial TMO_2G
