Difference between revisions of "VAYU Cape Compatibility"

From Yantrr Wiki
Jump to: navigation, search
(Chart)
(Chart)
Line 57: Line 57:
 
|bgcolor="lawngreen" | Compatible
 
|bgcolor="lawngreen" | Compatible
 
|}
 
|}
 +
 +
<pre>
 +
Notes 1. UART1_TXD and UART1_RXD used in full duplex and half duplex mode for 2G module
 +
2. GPIO1_16 is used as UART1_DTRN when used in Full Duplex mode
 +
3. EHRPWM1B is used for GPS Module Reset
 +
4. UART$_TXD and UART4_RXD is used for GPS Module
 +
5. GPIO1_28 is used for resetting 2G or 3G modules
 +
</pre>

Revision as of 10:47, 26 February 2014

Yantrr provides this information on the basis of best effort analysis of published specifications of other capes and does not guarantee the compatibility.

Chart

Board 2G (Dual/Quad) 2G+GPS 3G(GSM/CDMA) 3G+GPS GPS Only
TT3201 UART1_RXD and
UART1_TXD conflicts
UART1_RXD and
UART1_TXD conflicts
Compatible Compatible Compatible
CAN Bus UART1_RXD and
UART1_TXD conflicts
UART1_RXD and
UART1_TXD conflicts
Compatible Compatible Compatible
RS232 Compatible Compatible Compatible Compatible Compatible
RS485 GPIO1_16 conflicts GPIO1_16 and
EHRPWM1B conflicts
Compatible EHRPWM1B conflicts EHRPWM1B conflicts
Weather Cape Compatible Compatible Compatible Compatible Compatible
Profibus Uart1(rxd,txd)
conflicts
Uart1(rxd, txd) and
Uart4(rxd,txd)conflicts
Compatible Uart4(rxd,txd)
conflicts
Uart4(rxd,txd)
conflicts
Inertial Navigation System UART1_TXD, UART1_RXD and < br\> GPIO1_28 conflicts UART1_TXD, UART1_RXD and < br\> GPIO1_28 conflicts GPIO1_28 conflicts GPIO1_28 conflicts Compatible
 
Notes 1. UART1_TXD and UART1_RXD used in full duplex and half duplex mode for 2G module
2. GPIO1_16 is used as UART1_DTRN when used in Full Duplex mode
3. EHRPWM1B is used for GPS Module Reset
4. UART$_TXD and UART4_RXD is used for GPS Module
5. GPIO1_28 is used for resetting 2G or 3G modules