Difference between revisions of "Configuring USB Wireless Devices"

From Yantrr Wiki
Jump to: navigation, search
Line 1: Line 1:
 
Note : Ensure the USB WiFi is connected to Beaglebone Black/VIBE before device bootup
 
Note : Ensure the USB WiFi is connected to Beaglebone Black/VIBE before device bootup
 
== Instructions ==
 
== Instructions ==
 +
*Check that USB WiFi is visible on the USB bus by:
 +
<pre>
 +
# lsusb
 +
Bus 001 Device 002: ID 0424:2412 Standard Microsystems Corp.
 +
Bus 002 Device 002: ID 0bda:8176 Realtek Semiconductor Corp. RTL8188CUS 802.11n WLAN Adapter
 +
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
 +
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
 +
</pre>
 +
*Idetify USB WiFi Device listed above supported by Debian
 +
Search your WiFi module is listed on page https://wiki.debian.org/WiFi#USB_Devices
 +
For example,
 +
The WiFi module RTL8188CUS is supported under module name rtl8192cu.
 +
 +
If its not supported, Please contact Yantrr Support team.

Revision as of 01:46, 19 September 2015

Note : Ensure the USB WiFi is connected to Beaglebone Black/VIBE before device bootup

Instructions

  • Check that USB WiFi is visible on the USB bus by:
# lsusb
Bus 001 Device 002: ID 0424:2412 Standard Microsystems Corp. 
Bus 002 Device 002: ID 0bda:8176 Realtek Semiconductor Corp. RTL8188CUS 802.11n WLAN Adapter
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
  • Idetify USB WiFi Device listed above supported by Debian

Search your WiFi module is listed on page https://wiki.debian.org/WiFi#USB_Devices For example, The WiFi module RTL8188CUS is supported under module name rtl8192cu.

If its not supported, Please contact Yantrr Support team.