Difference between revisions of "Vayu Cape Application Notes"
From Yantrr Wiki
(→Configuring Software for Cape) |
|||
| Line 1: | Line 1: | ||
This page contain Application Notes about how to setup Yantrr Beaglebone Vayu Cape with Beaglebone Black. | This page contain Application Notes about how to setup Yantrr Beaglebone Vayu Cape with Beaglebone Black. | ||
| − | == | + | == Configuring for Data Connection Vayu 2G & 3G capes == |
| − | + | Data connection is established based on PPP protocols. Wvdial is mainly used to configure the dialup settings. | |
| − | + | For setting up various settings for PPP connection and establishing a data connection , follow this: [[Configuring for Data Connection]] It contains: | |
| − | + | * Way to setup the Vayu 3g Capes | |
| − | + | * How to write wvdial conf files | |
| − | For setting up various settings for PPP connection and establishing a data connection , follow this [[Configuring for Data Connection]] | + | * Sample wvconf file for AT&T and T-Mobile USA |
== Configuring for GPS Location and Time Synchronization == | == Configuring for GPS Location and Time Synchronization == | ||
| − | + | GPS on the 2G & 3G capes are used for mainly: | |
| + | * Basic location and coarse time as NMEA-0183 message from the serial UART ttyO4 port | ||
| + | * Fine 1PPS Time synchronization by running a NTP server for Debian Wheezy, follow this [[Configuring for GPS Location and Time Synchronization]] | ||
Revision as of 01:30, 24 February 2014
This page contain Application Notes about how to setup Yantrr Beaglebone Vayu Cape with Beaglebone Black.
Configuring for Data Connection Vayu 2G & 3G capes
Data connection is established based on PPP protocols. Wvdial is mainly used to configure the dialup settings. For setting up various settings for PPP connection and establishing a data connection , follow this: Configuring for Data Connection It contains:
- Way to setup the Vayu 3g Capes
- How to write wvdial conf files
- Sample wvconf file for AT&T and T-Mobile USA
Configuring for GPS Location and Time Synchronization
GPS on the 2G & 3G capes are used for mainly:
- Basic location and coarse time as NMEA-0183 message from the serial UART ttyO4 port
- Fine 1PPS Time synchronization by running a NTP server for Debian Wheezy, follow this Configuring for GPS Location and Time Synchronization
