VAYU Compatibility
From Yantrr Wiki
Revision as of 21:32, 12 April 2014 by Ashu (Talk | contribs) (Compatibility of various VAYU capes with other BeagleBone Black capes)
VAYU Capes Compatibility With Other BeagleBone Black Capes
(Yantrr provides this information on the basis of best effort analysis of published specifications of other capes and does not guarantee the compatibility)
(Yantrr VAYU capes can be used in stacked configuration but should be the topmost cape installed in the stack due to access needed to antenna connectors)
Cape | VAYU-2G-A,VAYU-2GQ-A | VAYU-2GP-A,VAYU-2GQP-A | VAYU-3GH-A | VAYU-3GHP-A | VAYU-P |
---|---|---|---|---|---|
TT3201 | UART1_RXD and UART1_TXD conflicts1 | UART1_RXD and UART1_TXD conflicts1 | Fully Compatible | Fully Compatible | Fully Compatible |
Example | Example | Example | Example | Example | Example |
Example | Example | Example | Example | Example | Example |
Example | Example | Example | Example | Example | Example |
Example | Example | Example | Example | Example | Example |
Example | Example | Example | Example | Example | Example |
Notes:
- UART1_TXD and UART1_RXD used in full duplex and half duplex mode for 2G module
- GPIO1_16 is used as UART1_DTRN when used in full duplex mode
- EHRPWM1B is used for GPS module reset
- UART4_TXD and UART4_RXD is used for GPS module
- GPIO1_28 is used for resetting 2G or 3G modules