VAYU Cape Compatibility
From Yantrr Wiki
Yantrr provides this information on the basis of best effort analysis of published specifications of other capes and does not guarantee the compatibility.
Chart
Board | 2G (Dual/Quad) | 2G+GPS | 3G(GSM/CDMA) | 3G+GPS | GPS Only |
---|---|---|---|---|---|
TT3201 | UART1_RXD and UART1_TXD conflicts1 |
UART1_RXD and UART1_TXD conflicts1 |
Compatible | Compatible | Compatible |
CAN Bus | UART1_RXD and UART1_TXD conflicts1 |
UART1_RXD and UART1_TXD conflicts1 |
Compatible | Compatible | Compatible |
RS232 | Compatible | Compatible | Compatible | Compatible | Compatible |
RS485 | GPIO1_16 conflicts2 | GPIO1_162 and EHRPWM1B conflicts3 |
Compatible | EHRPWM1B conflicts3 | EHRPWM1B conflicts3 |
Weather Cape | Compatible | Compatible | Compatible | Compatible | Compatible |
Profibus | UART1(RXD,TXD) conflicts1 |
UART1(RXD,TXD)1 and UART4(RXD,TXD) conflicts4 |
Compatible | UART4(RXD,TXD) conflicts4 |
UART4(RXD,TXD) conflicts4 |
Inertial Navigation System | UART1_TXD, UART1_RXD1 and GPIO1_285 conflicts |
UART1_TXD, UART1_RXD1 and GPIO1_285 conflicts |
GPIO1_285 conflicts | GPIO1_285 conflicts | Compatible |
Notes 1. UART1_TXD and UART1_RXD used in full duplex and half duplex mode for 2G module 2. GPIO1_16 is used as UART1_DTRN when used in Full Duplex mode 3. EHRPWM1B is used for GPS Module Reset 4. UART4_TXD and UART4_RXD is used for GPS Module 5. GPIO1_28 is used for resetting 2G or 3G modules
If you have specific queries, please direct it towards | sales@yantrr.com.