INDU-RS

Overview

Yantrr INDU-RS series of capes provide the capability of interfacing with sensors and instruments using RS232/422/485. These capes are designed to industrial grade I/O interface standards assuring reliable operation and protection in extreme operating environments. The electronics on the capes has been tested to be in compliance with strict EU standards for radiated and conducted emissions.

Utilizing Modbus protocol, these capes can be used to transform VIBE/VIBE2 IoT platform into powerful SCADA & process control systems. INDU-RS capes are also fully compatible with BeagleBone CPU platform.

Quick Start Guide

Following sections gives details of board connectors, pin configuration and various jumpers on INDU-RS3HD, INDU-RS3HD-DC15W boards.

Board Connectors Layout

INDU-RS3HD	INDU-RS3HD-DC15W

Pin Connections

Note: INDU-RS485 Headers P6 & P7 correspond to Beaglebone Black [BB] Header P8 & P9 respectively.

Jumper Details

Getting Started

Setting up the system

1. Mount the INDU-RS cape on Beaglebone Black or Yantrr's VIBE/VIBE2 platform carefully.
2. Ensure all the jumpers are in place according to your application use.
3. Now power up the full setup

For INDU-RS3HD

You have to supply 5V DC power supply to Beaglebone Black or VIBE/VIBE2.

Using Beaglebone Black	Using VIBE/VIBE2

For INDU-RS3HD-DC15W 

You have two option for supplying power:

• 9V-24V DC power through terminal headers supplied to INDU-RS cape

Using Beaglebone Black	Using VIBE/VIBE2

• 5V DC power through normal adapter supplied to Beaglebone Black or VIBE/VIBE2
  Note : For this option, before powering up remove the jumper J1

Software Setup Guide

• INDU-RS3HD, INDU-RS3HD-DC15W