Difference between revisions of "Main Page"

From Yantrr Wiki
Jump to: navigation, search
(→‎VIBE2 IoT Platform)
(→‎Precompiled Images)
 
(49 intermediate revisions by the same user not shown)
Line 1: Line 1:
 
This is the main page for all the documentation in support of our products. We will try to keep the wiki articles updated to the best of our knowledge. If you find anything missing, please let us know at [mailto:support@yantrr.com Yantrr Support]
 
This is the main page for all the documentation in support of our products. We will try to keep the wiki articles updated to the best of our knowledge. If you find anything missing, please let us know at [mailto:support@yantrr.com Yantrr Support]
  
−
   
+
== ARCA-V2 Wireless Gateway ==
 +
=== [[ARCA-V2#ARCA-V2_Series_Overview| Overview]]===
 +
=== [[ARCA-V2#Software_Setup_Guide|Software Startup Guide for ARCA-V2]]===
 +
=== Precompiled Images ===
 +
*''' Debian '''
 +
** '''MicroSD card Image : ''' [http://live.yantrr.net/download.php?id=8&token=zsGFxkEw70Gu7CgoHiyfi67wyFJyfSYH arca-lnx4_19-debian10_qmi-06042022.img.xz]
  
−
== VAYU M2M Capes ==
+
=== [[Building_VIBE2_Boot_Image|Building ARCA-V2 Boot Image]]===
−
=== SW Images and Drivers ===
+
−
We provide active support for Debian Wheezy for all our capes. We are actively developing Android and Angstrom support and notes for these will also be here soon. To get started with our capes, you can take any of these paths:
+
  
−
==== Precompiled Image instructions ====
+
== VIBEQ IoT Platform ==
−
* <big>'''Debian Image'''</big> (all patches applied / driver installed). [[Vayu_Cape_SW_images_and_drivers | <big>'''Click Here'''</big>]]
+
===[[VIBEQ#Overview|Overview]]===
−
* Compile Debian image from scratch and apply needed patches and install driver [[Compiling_Yantrr_Vayu_Drivers_on_Debian_Wheezy | <big>'''Click Here'''</big>]].
+
=== [[VIBEQ#Getting_Started|Getting Started]]===
−
* Compile Android image from scratch and apply needed patches and install driver [[Compiling_Yantrr_Vayu_Drivers_on_Android | <big>'''Click Here'''</big>]].
+
=== Precompiled Images ===
−
* <big>'''Ångström,'''</big> Ubuntu generic installation in BeagleBone to get our cape working [[Angstrom Guide |<big>'''Click Here'''</big>]]
+
*''' Debian '''
 +
** '''MicroSD card Image : '''  
 +
*** [http://live.yantrr.net/download.php?id=5&token=s0bkEgZI7wwKoEOHCFdisnfelLe6W7XR VIBEQ_4.4_debian8_2303018.img.xz]
  
−
=== Software Starter Guide  ===
+
== VAYU2 M2M Capes ==
−
Covers steps to enable data connection on 2G or 3G capes, and also steps to use GPS PPS and NMEA messages with an application to setup NTP server.
+
===[[VAYU2#Overview|Overview]]===
 +
=== [[VAYU2#Getting_Started|Getting Started]]===
 +
=== Precompiled Images ===
 +
*''' Debian '''
 +
** '''MicroSD card Image : '''
 +
*** [http://live.yantrr.net/download.php?id=7&token=THfkPjnv0YAt01NiCOg6PrvvbJhAhnCr VAYU2-4.9-debian-9.3-2gb-20180403.img.xz(latest)]
  
−
* [[SW_startup_guide_for_Vayu_2G | Software Startup guide for 2G capes ]]
+
== INDU-RS ==
−
* [[SW_startup_guide_for_Vayu_3G | Software Startup guide for 3G capes ]]
+
===[[INDU-RS#Overview|Overview]]===
−
* [[SW_startup_guide_for_Vayu_GPS | Software Startup guide for GPS capes]]
+
=== [[INDU-RS#Getting_Started|Getting Started]]===
−
* [[HW_SW_FAQ | Frequently Asked Question about Hardware and Software ]]
+
=== Precompiled Images ===
−
 
+
*''' Debian '''
−
=== Cape Startup Guide ===  
+
** '''MicroSD card Image : ''' [http://live.yantrr.net/download.php?id=4&token=xRlFgWEIfwXs6XYaSTM4Fil5DPpvpMD7 INDU-4.9-debian-9.3-2gb.img.xz] (Beaglebone Black)
−
* [[media:Leaflet_for_Vayu_2GP_Cape.pdf | How to start with the VAYU 2G Capes]]
+
−
* [[media:Leaflet_for_Vayu_3GHP_Cape.pdf‎ | How to start with the VAYU 3G Capes]]
+
−
* [[media:Leaflet_for_Vayu_P_Cape.pdf | How to start with the VAYU P Cape]]
+
−
* [[VAYU Cape Compatibility]]
+
−
 
+
−
=== Cape Pinouts and other details===
+
−
* [[Vayu_2G/2GP_Cape | 2G Capes]]
+
−
* [[Vayu_3GH/3GHP_Cape | 3G (HSPA) Capes]]
+
−
* [[Vayu_3GC/3GCP_Cape | 3G (CDMA) Capes]]
+
−
* [[Vayu_P_Cape | GPS Only Capes]]
+
  
 +
== VAYU M2M Capes ==
 +
===[[VAYU#Overview|Overview]]===
 +
=== [[VAYU#Getting_Started|Getting Started]]===
 +
=== Precompiled Images ===
 +
*''' Debian '''
 +
** '''MicroSD card Image : ''' [http://live.yantrr.net/download.php?id=6&token=xK0Kkx6j1BGzPngyqWpIOosioyVM6j6U VAYU-4.9-debian-9.3-2gb-20180403.img.xz]
  
 
== VIBE IoT Platform ==
 
== VIBE IoT Platform ==
−
=== SW Images and Drivers ===
 
−
We provide active support for Debian Wheezy on VIBE. VIBE is shipped with eMMC flashed with Yantrr's precompiled version. To get started, you can take any of these paths:
 
−
 
−
==== Download Precompiled Image ====
 
−
Download compressed image for 4GB sd card :
 
−
*<big>'''Debian Image'''</big> (all patches applied / driver installed). [https://www.dropbox.com/s/dr8y9ei3l6hqg1n/Yantrr_VIBE_3.8.13bone70.img.xz?dl=0  <big>'''Click Here'''</big>]
 
−
 
 
=== Software Starter Guide  ===
 
=== Software Starter Guide  ===
 
Covers full introduction to VIBE hardware and steps to use the Modem and GPS.
 
Covers full introduction to VIBE hardware and steps to use the Modem and GPS.
 
* [[SW_startup_guide_for_VIBE | Software Startup guide for VIBE ]]
 
* [[SW_startup_guide_for_VIBE | Software Startup guide for VIBE ]]
 
* [[media:Leaflet_for_VIBE.pdf | How to start with the VIBE IoT platform]]
 
* [[media:Leaflet_for_VIBE.pdf | How to start with the VIBE IoT platform]]
−
 
−
== VIBE2 IoT Platform ==
 
−
* [[VIBE2#Overview| Overview]]
 
−
* [[SW_startup_guide_for_VIBE2|SW Startup Guide for VIBE2]]
 
  
 
== Application Notes ==
 
== Application Notes ==
Line 60: Line 55:
 
== Operating Systems supported (Debian, Ubuntu, Angstrom, Android) ==
 
== Operating Systems supported (Debian, Ubuntu, Angstrom, Android) ==
 
We have tested the VAYU capes in the following configurations on different operating systems:
 
We have tested the VAYU capes in the following configurations on different operating systems:
−
* '''Debian Wheezy:''' We provide full support for this. Pre-compiled images for both SD Card based use and for flashing to the eMMC are provided (see Section above).
+
* '''Debian:''' We provide full support for this. Pre-compiled images for both SD Card based use and for flashing to the eMMC are provided (see Section above).
 
* '''Ubuntu:''' We have tested our capes on Ubuntu. GPS (NMEA over serial tty port) is known to be working, PPS requires PPS support to be compiled in the kernel. The 3G modem (of the 3GH* and 3GC* capes) as well as the 2G modem (of the 2GD* and 2GQ* capes) have been tested to work on Ubuntu. We are in the process of generating Ubuntu images and making all configuration files available online.  
 
* '''Ubuntu:''' We have tested our capes on Ubuntu. GPS (NMEA over serial tty port) is known to be working, PPS requires PPS support to be compiled in the kernel. The 3G modem (of the 3GH* and 3GC* capes) as well as the 2G modem (of the 2GD* and 2GQ* capes) have been tested to work on Ubuntu. We are in the process of generating Ubuntu images and making all configuration files available online.  
 
* '''Angstrom:''' See [[Angstrom Guide |<big>'''Click Here'''</big>]].
 
* '''Angstrom:''' See [[Angstrom Guide |<big>'''Click Here'''</big>]].

Latest revision as of 02:21, 2 May 2022

This is the main page for all the documentation in support of our products. We will try to keep the wiki articles updated to the best of our knowledge. If you find anything missing, please let us know at Yantrr Support

ARCA-V2 Wireless Gateway

Overview

Software Startup Guide for ARCA-V2

Precompiled Images

Building ARCA-V2 Boot Image

VIBEQ IoT Platform

Overview

Getting Started

Precompiled Images

VAYU2 M2M Capes

Overview

Getting Started

Precompiled Images

INDU-RS

Overview

Getting Started

Precompiled Images

VAYU M2M Capes

Overview

Getting Started

Precompiled Images

VIBE IoT Platform

Software Starter Guide

Covers full introduction to VIBE hardware and steps to use the Modem and GPS.

Application Notes

Operating Systems supported (Debian, Ubuntu, Angstrom, Android)

We have tested the VAYU capes in the following configurations on different operating systems:

  • Debian: We provide full support for this. Pre-compiled images for both SD Card based use and for flashing to the eMMC are provided (see Section above).
  • Ubuntu: We have tested our capes on Ubuntu. GPS (NMEA over serial tty port) is known to be working, PPS requires PPS support to be compiled in the kernel. The 3G modem (of the 3GH* and 3GC* capes) as well as the 2G modem (of the 2GD* and 2GQ* capes) have been tested to work on Ubuntu. We are in the process of generating Ubuntu images and making all configuration files available online.
  • Angstrom: See Click Here.
  • Android: We've been able to partially test our cape. Again, there are no known issues but we will put images and configuration files after fully verifying them.

Short Application Notes

Configuring ppp for automatic connection

Retrieved from "http://wiki.yantrr.com/index.php?title=Main_Page&oldid=1518"